Texture mapping on gluDisk

  • Texture mapping on gluDisk Marnix

    I'm trying to map a brick texture on the edge of a fountain and I'm using gluDisk for that. How can I make the right coordinates for the disk? My code looks like this and I have only found a function that takes the texture along with the camera.

    I want the cubic texture to be alongside of the fountain, but gluDisk does a linear mapping. How do I get a circular mapping?

    void Fountain::Draw()
        glPushMatrix(); // push 1
        glEnable(GL_TEXTURE_2D); // enable texturing
        glPushMatrix(); // push 2
        glRotatef(90,-1,0,0); // rotate 90 for the quadric
        // also drawing more here...
        // stone texture
        glBindTexture(GL_TEXTURE_2D, texIDs[0]);
        glTexParameteri(GL_TEXTURE_2D, GL_TEXTURE_WRAP_S, GL_REPEAT);
        glTexParameteri(GL_TEXTURE_2D, GL_TEXTURE_WRAP_T, GL_REPEAT);   
        glPushMatrix(); // push 3
        // spherical texture generation
        // this piece of code doesn't work as I intended
        GLUquadric *tub = gluNewQuadric();
        gluQuadricTexture(tub, GL_TRUE);
        gluDisk(tub, radius, outerR, nrVertices, nrVertices);
        glPopMatrix(); // pop 3
        // more drawing here...
        glPopMatrix(); // pop 2
        // more drawing here...
        glPopMatrix(); // pop 1

    To refine my question a bit. This is an image of what it is at default (left) and of what I want (right). The texture should fit in the border of the disk, a lot of times. If this is possible with the texture matrix, than that's fine with me as well. Left is the default texCoords, right is what I want

  • I'm not sure I understand your diagram. Are you saying you want the image to repeat along the edge of the disk (i.e. the lines represent the borders of the image?) If so, that may produce visual artifacts that you might want to consider first.

    The way you've drawn it here, the image will compress near the inner part of the disk, and stretch near the outer part. The different radii of the inner/outer circle causes the arc lengths to be different. You're essentially mapping a square to a trapezoid. I would post an image, but my account is too new. Argh.

    I don't think GLU offers any other form of texture mapping for disks. If you want that kind of custom texture coordinates, you probably need to roll your own form of disk generation, which isn't that bad anyways. Still, you might want to reconsider using GLU for actual geometry anyways.

c++ opengl uv-mapping
Related questions and answers
  • , GL_FILL); // Reset Back-Facing Polygon Drawing Mode ( NEW ) glDisable (GL_BLEND); glPopMatrix(); } Finally this is the tex.Use() function that loads a BMP texture and somehow gets blended perfectly with the Toon shading void GLTexture::Use() { glEnable(GL_TEXTURE_2D); // Enable texture mapping glBindTexture(GL_TEXTURE_2D... ( NEW ) // For Crying Out Loud Don't Let OpenGL Use Bi/Trilinear Filtering! ( NEW ) glTexParameteri (GL_TEXTURE_1D, GL_TEXTURE_MAG_FILTER, GL_NEAREST); glTexParameteri (GL_TEXTURE_1D, GL

  • , bmask, amask); SDL_BlitSurface(LoadedImage, NULL, image, NULL); glGenTextures(1, &texture); glBindTexture(GL_TEXTURE_2D, texture); glTexParameteri(GL_TEXTURE_2D, GL_TEXTURE_WRAP_S, GL_CLAMP_TO_EDGE); glTexParameteri(GL_TEXTURE_2D, GL_TEXTURE_WRAP_T, GL_CLAMP_TO_EDGE); glTexParameteri(GL_TEXTURE_2D, GL_TEXTURE_MAG_FILTER, GL_LINEAR); glTexParameteri (GL_TEXTURE_2D, GL_TEXTURE... tile being rendered, but I'm getting a blurred mess :S. My rendering code: glBindTexture(GL_TEXTURE_2D, texture); float texscale = 1.0f / (float)tileWidth; sourceX = sourceX / (float)tileSheetWidth

  • , temporarySurface->h, 0, GL_RGBA, GL_UNSIGNED_BYTE, temporarySurface->pixels); glTexParameteri( GL_TEXTURE_2D, GL_TEXTURE_MIN_FILTER, GL_LINEAR ); glTexParameteri( GL_TEXTURE_2D, GL_TEXTURE_MAG_FILTER, GL_LINEAR ); ...and the drawing code itself. glBindTexture(GL_TEXTURE_2D,thisIsMyTexture); glBegin( GL_QUADS ); glTexCoord2f(0.0f, 0.0f); glVertex3f(0.0f, 0.0f, 1.0f); glTexCoord2f(1.0f... = SDL_DisplayFormat(zoomedImage); SDL_FreeSurface(zoomedImage); } return optimizedImage; } ...here is the code I actually use to create the GL texture... GLuint thisIsMyTexture

  • ); glTexParameterf(GL_TEXTURE_2D, GL_TEXTURE_MAG_FILTER, GL_LINEAR); glTexParameterf(GL_TEXTURE_2D, GL_TEXTURE_MIN_FILTER, GL_LINEAR); glTexParameterf(GL_TEXTURE_2D, GL_TEXTURE_WRAP_S, GL_CLAMP_TO_EDGE); glTexParameterf(GL_TEXTURE_2D, GL_TEXTURE_WRAP_T, GL_CLAMP_TO_EDGE); glTexImage2D(GL_TEXTURE_2D, 0, GL_RGBA8, m_FBOWidth, m_FBOHeight, 0, GL_RGBA, GL_UNSIGNED_BYTE, 0); glBindTexture(GL...); glBindFramebuffer(GL_FRAMEBUFFER, 0); } Here is my drawing box code, which just takes a transformation matrix and calls the appropriate functions. The current values of P is a projection matrix

  • I'm having problems drawing a simple sprite. When I draw: void CSprite2D::render() { CHECKGL(glLoadIdentity()); CHECKGL(glEnable(GL_TEXTURE_2D)); CHECKGL(glEnable(GL_BLEND)); CHECKGL(glBlendFunc(GL_SRC_ALPHA, GL_ONE_MINUS_SRC_ALPHA)); m_texture->bind(); //CHECKGL(glPushMatrix()); CHECKGL(glBegin(GL_TRIANGLE_STRIP...(glVertex3i( m_position.x, m_position.y + m_dimensions.y,0)); CHECKGL(glEnd()); //CHECKGL(glPopMatrix()); CHECKGL(glDisable(GL_BLEND)); } I'm always get an GL_INVALID

  • is the init code for the FBO and it's texture: glGenTextures(1,&fboimg); glBindTexture(GL_TEXTURE_2D,fboimg); glTexParameterf(GL_TEXTURE_2D, GL_TEXTURE_MAG_FILTER, GL_LINEAR); glTexParameterf(GL_TEXTURE_2D, GL_TEXTURE_MIN_FILTER, GL_LINEAR); glTexParameterf(GL_TEXTURE_2D, GL_TEXTURE_WRAP_S, GL_CLAMP_TO_EDGE); glTexParameterf(GL_TEXTURE_2D, GL_TEXTURE_WRAP_T, GL_CLAMP_TO_EDGE); glTexImage2D(GL_TEXTURE_2D, 0, GL_RGBA8, 512, 512, 0, GL_RGBA, GL_UNSIGNED_BYTE, 0); glBindTexture(GL_TEXTURE_2D, 0); glGenFramebuffers(1,&fboHandle); glBindFramebuffer(GL_FRAMEBUFFER,fboHandle

  • (GL_LIGHT0); glEnable(GL_LIGHT1); glClear(GL_COLOR_BUFFER_BIT | GL_DEPTH_BUFFER_BIT); glColor3f(0.0f, 0.0f, 0.0f); int vertexIndex = 0, normalIndex; glRotatef(90, 0, 1, 0); glPushMatrix(); for(int a = 0; a < (int)groups.size(); a++) { if(groups[a].type == "prop") { //Code for rotation glPopMatrix(); glPushMatrix(); float x,y,z; x = y = z = 0; int...Im writing a game for which, one of the models are loaded from an .obj file. It's a model of a plane, and I want to rotate the propeller. The object file is broken into groups, and the propeller

  • _Quit(); return -1; } glGenTextures(1, &image); glBindTexture(GL_TEXTURE_2D, image); glTexParameteri(GL_TEXTURE_2D, GL_TEXTURE_WRAP_S, GL_REPEAT); glTexParameteri(GL_TEXTURE_2D, GL_TEXTURE_WRAP_T, GL_REPEAT); glTexParameteri(GL_TEXTURE_2D, GL_TEXTURE_MAG_FILTER, GL_NEAREST); glTexParameteri(GL_TEXTURE_2D, GL_TEXTURE_MIN... with DevIL, and glGetString(GL_VENDOR) is returning "NVidia Corporation". Any ideas? I'm sorry to be dumping all the code, but I've got absolutely no idea at all what is doing it. I'm very new

  • I'm trying to load MD2 models (stolen from Cube) and my loader seems to be loading the models fine, but I can't say the same for the drawing of the model. Here's my code: typedef float vec3_t[3... char index_normal; }; typedef short md2_textcoord_t[2]; struct md2_frame_t { float scale[3]; vec3_t translate; char name[16]; md2_vertex_t vertices[1]; // First vertex of this frame...; float current_time, old_time, interpol; int type, current_frame, next_frame; }; struct md2_glcmd_t { float s; float t; int index; }; #define MD2_IDENT (('2'<<24) + ('P'<<16

Data information